SAMSUNG S5 (G900F) Clone MTK6572 Firmwares download for flashing with SP Flash tool

SAMSUNG S5 (G900F) Clone Super Copy Firmwares Back up by original Phone and can flashing with SP Flash tool.

Some problems must to flshing with original stock firmware :
Phone hit by virus apk
Dead phone after reset
Boot Loop / Stuck on Loop
Lost baseband no signal
Blue screen after reset with CWM / TWRP recovery




Samsung Galaxy S5 Clone  Phone Back Cover Information :

Samsung galaxy s5 g900f super copy / clone 1 sim mt6572
S/N : SM-900F RF8F30M3G1024
FCCID : A3SMG900F

===============================================
Phone Informations checking with adb use Miracle Box Software :

Connecting to Phone,Wait..ok
Hardware:mt6572
Board:msm8974
CPU ABI:armeabi-v7a
Manufacturer:samsung
Model:sm-g900
Android Ver:4.4.2
bootloader ver:unknown
USB config:mass_storage,adb
User:se.infra
FS:unknown
Baseband ver:moly.wr8.w1315.md.wg.mp.v1, 2013/07/04 15:16
Build number:kot49h.g900dkeu1ancc
ID:kot49h
Region:us
Language:en
Chipset:msm8974
IMEI1:22222xxxx222222
Root: Rooted
Done

===============================================================
||Download Firmware => Download Now | Password : www.gsmaceh.com ||
===============================================================
Learn more tutorial Full image => Tutorials how to use SP Flashtool

How to Flash Samsung S5 (G900F) Clone MTK6572 with Sp flash tool ?

Step 1: Download and extract the stock firmware on your computer.

Step 2: After extracting you will find the SP Flash Tool, Driver and instruction manual.

Step 3: Install the USB Drivers (skip if drivers are already installed).

Step 4: Open the SP Flash Tool and load the Scatter File from the firmware folder.

Step 5: Connect your Smartphone to the computer using the USB Driver.

Step 6: Click on Upgrade / Download Button in the SP Flash Tool to Begin the Flashing.

Step 7: Green Ring will appear at the end of successful Flash.

Hope can solved your problem, and always check ours new update :D